注册时间2004-3-1
最后登录1970-1-1
在线时间 小时
主题
精华
积分2745
贡献
ST
道具劵
|
马上登陆,参与交流。无法注册或登陆请加QQ群:777694204 或Email:admin@cnkeyboard.net
您需要 登录 才可以下载或查看,没有帐号?注册
x
刚刚看到的,晚上回去研究研究。
Here are the EQ settings I use on the PSR-2000 that really seems to bring out a lot of the mid and high range voices. It is particularly effective when used with the grand piano. The following is a copy of instructions I posted on www.psrtutorial.com
Through many hours of experimentation, I have found the following settings to be effective for playing large rooms, halls and outdoor jobs . In the USER1 slot, select edit, then set the "Q" control at 0.7 and the "FREQ" control at 1.8 kHZ. Now adjust the EQ sliders for the Gain to the following settings: EQ1=6, EQ2=4, EQ3=4, EQ4=8 and EQ5=10. Press the "STORE1" button and your settings will then be saved to that memory location. You'll be given a chance to rename USER1 to something that might remind you of what this settings is for. Now press the [EXIT] button and you will be returned to the main "MASTER EQ" screen.
详细步骤:
Ok! Power on.
Press the button marked MIXING CONSOLE, then press the NEXT button and tab over to EQ.
Now press the "B" button on the upper left corner of the screen and scroll down until you seen USER1.
Next, press the "F" button on the upper right side of the screen next to where it says EDIT.
Now you can adjust the sliders using the 3,4,5,6 & 7 buttons at the bottom of the screen.
After making the adjustments, press the "H" button next to where it says STORE1 and the information will be saved in that memory location.
Press exit twice and you're back to the main screen.
Piece of cake!
Gary |
|