键盘中国

 找回密码
 注册

QQ登录

只需一步,快速开始

扫码快捷登录

搜索
baidu
查看: 2337|回复: 2

MOXF6/8固件升级实用教程

[复制链接]
发表于 2016-6-16 11:14 | 显示全部楼层 |阅读模式

马上登陆,参与交流。无法注册或登陆请加QQ群:777694204 或Email:admin@cnkeyboard.net

您需要 登录 才可以下载或查看,没有帐号?注册

x
买回来的Moxf8发现,系统版本号还停留在1.03,官方早有1.11增加了对苹果设备的支持调用,修复很多问题。所以果断从yamaha官网下载最新的固件。
简单看了下英文版的官方升级指导,写得太少了,开始不成功。后来通过查找国外论坛和自已摸索搞定。
我相信很多人也想升级,却不知道怎么升级。所以有了以下简明教程。

如何查看琴的固件版本号?
开机,按[Unitity],[JOB],显示屏上 Firm:V1.XX.XX 就是

准备一个大于64MB的U盘,一定要在合成器上对U盘进行格式化,否则合成器认不出u盘。
操作步骤为:
        1.开机-按[FILE]-按[SF2]选择Format项-按[ENTER]确认,注意格式化的时候要选择 USB Flash,而不是Flash Moduler
        2.然后将此u盘拿到电脑,把从官网上下载的moxf_v111.zip固件解压,得到8L26OS_.PGM文件,放入格式化好的u盘里
        3.关闭合成器,然后插入u盘到to device口上,然后按住[LEVEL]键开机,[LEVEL]键是哪个?就是琴左上方A/D Input上面那个键。开机后后,此时[REC]键下方灯会闪烁,按一下确定更新升级即可,升级期间不可断电,直到出现Reboot MOXF8字样才能关机重启
Yamaha这琴cpu一般,升级大概需要5-10分钟,没记时间,反正挺慢的。

以下是每个版本更新日志,看看都有哪些改动是大家需要的,选择性升级。

< V1.10 to V1.11>
- Solved a problem in which operation would freeze when pressing the fast-forward button during playback while a Tempo or Scene Track was selected in the Pattern Chain Edit display.

- Solved some other minor problems.

NOTICE:
- When transmitting and receiving MIDI/audio data on the Mac and Windows platforms, make sure to install the Yamaha Steinberg USB Driver.
- When updating the firmware to V1.10 or later, make sure to use the Yamaha Steinberg USB Driver version 1.8.6 or later.


<V1.03 to V1.10>
- Now allows connection to iOS. However, the confirmed operability is for version 7 or later, and is limited to iPad mini retina display models (A1489, A1490, A1491), iPad Air (A1474, A1475, A1476), 4th generation iPad (A1458, A1459, A1460) and iPhone 5s乮A1453, A1457, A1518, A1528, A1530, A1533乯, iPhone 5c乮A1507, A1516, A1526, A1529, A1532, A1456乯.
  *The text in parentheses above indicates the model numbers, and they are listed on the back of the main body of the iPad and iPhone.
- When polyphony is relatively large, the problem that some notes may have been delayed was improved.
- Solved a problem that operation might freeze when an empty waveform is selected and a continued note-on message is received with the XA control set to KeyOffSound in Voice Element Edit.
- Fixed a problem in which arpeggio output, excluding the recording channel, was recorded in Song recording.
- Solved a problem that the part designation of parameter change became Part 1 at all times when operating a knob, when Local Control was set to Off.
- Solved a problem that SysEX messages which were received over a port other than Port 1 were recorded to a Song.
- Solved some other minor problems.

NOTICE:
- When transmitting and receiving MIDI/audio data on the Mac and Windows platforms, make sure to install the Yamaha Steinberg USB Driver.
- When updating the firmware to V1.10 or later, make sure to use the Yamaha Steinberg USB Driver version 1.8.6 or later.


<V1.02 to V1.03>
- Solved a problem that resulted in incomplete reading of User Arpeggios when loading a file created on a MOTIF XF6, MOTIF XF7, or MOTIF XF8.
- Solved some other minor problems.

NOTICE:
You cannot load the file that was saved within firmware version V1.03 or later with firmware version V1.02 or earlier. However, you can load the file that was saved within firmware version V1.02 or earlier, and you can load the file within firmware version V1.03 or later.


<V1.00 to V1.02>
- Added a HALion5 Control Template for Remote mode.
- Solved a problem that prevented sounds being produced correctly when sample data had been read into an FL512M or FL1024M Flash Memory Expansion Module (sold separately).
- Solved a problem that prevented MOXF6/MOXF8 Editor from going offline when an FL512M or FL1024M Flash Memory Expansion Module (sold separately) was formatted or had waveform data deleted while it was online.
- Solved a problem that prevented Voice Banks of part parameters for Performance, Song Mixing, and Pattern Mixing being correctly read when loading a file created on a MOX6 or MOX8.
- Solved some other minor problems.
温馨提示: 发帖标题请概括内容,回帖请勿使用无意义字符或纯表情。积极参与发帖回帖交流能提高会员等级(提升下载权限)
回复

使用道具 举报

发表于 2016-7-1 18:35 | 显示全部楼层
感谢分享,有你们的分享才不断进步
温馨提示: 发帖标题请概括内容,回帖请勿使用无意义字符或纯表情。积极参与发帖回帖交流能提高会员等级(提升下载权限)
回复

使用道具 举报

发表于 2017-7-3 02:01 | 显示全部楼层
感谢好心的楼主
温馨提示: 发帖标题请概括内容,回帖请勿使用无意义字符或纯表情。积极参与发帖回帖交流能提高会员等级(提升下载权限)
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

关闭

站长推荐上一条 /2 下一条

微信公众号|领红包|举报|黑屋|手机|Archiver|官方QQ群:777694204|键盘中国 ( 粤ICP备19059169号-1 )

GMT+8, 2024-3-29 19:49 , Processed in 0.048836 second(s), 26 queries .

Powered by Discuz! X3.4

Copyright © 2001-2020, Tencent Cloud.

快速回复 返回顶部 返回列表