注册时间2007-2-3
最后登录1970-1-1
在线时间 小时
主题
精华
积分398
贡献
ST
道具劵
|
回复 11# 面包
UPDATE PROCEDURE:
!! Before updating, be sure to back up any custom programming as user memory will be erased in the process!!
If unfamiliar with the process, please see the following link (or your manual) for details: "Backing Up the Entire User Memory"
Obtain the latest system updates.
- Go to PC3 Downloads Section on our site.
- Under O/S "Updates" download the current update package.
(Be sure to carefully read through the included Release Notes.)
If using USB: connect a USB cable between the PC3 and your computer now.
Enter the Bootloader.
Press and hold the EXIT button while you power-up the PC3. Release the EXIT button when the Boot Loader's menu of options appears on the screen:
RUN UPDATE RUN SYSTEM FILE
PC3 IMAGE DIAGS RESET UTILITIES
You will use the various "soft buttons" under the screen to control the update process.
If using USB: a virtual USB drive will appear on your computer desktop representing the PC3.
Copy the update file(s):
If using USB: Copy just the PC3 File System Utility (PC3FT063.BIN) to the USB Desktop Drive on your computer.
If using xD: Copy all 3 system files to your xD card now: "PC3FT063.BIN", "PC3OS200.BIN" and "PC3OB200.PC3" and then insert the xD card into your PC3.
Press FILE UTILITIES:
RUN UPDATE RUN SYSTEM FILE
PC3 IMAGE DIAGS RESET UTILITIES
Press EXEC from file:
EXEC COPY SAVE
from from to FORMAT
file ext ext card <back>
Choose an external device: Depending on your connections, you may be asked to select between xD Card - or- USB port. If prompted, choose accordingly.
Choose an external device:
Card USB port CANCEL
Using the data wheel , select the PC3FT063.BIN file (asterisk ∗ placed next to selection):
Choose a file to execute:
∗ PC3FT063.BIN 147K bytes
CHOOSE DOWN UP CANCEL
Press CHOOSE:
Choose a file to execute:
∗ PC3FT063.BIN 147K bytes
CHOOSE DOWN UP CANCEL
You will briefly see a "Loading" message appear followed by the File System Utility Menu (depicted below). If installing by USB, your computer may issue a "device removal" notification. You can ignore it.
Press FORMAT FLASH:
PC3 File System Utility 0.63.11214
File system set up (52720Kb free)
UPDATE FORMAT SETUP COPY FILE
IMAGE FLASH SYSTEM FILES UTILS QUIT
PRESS FORMAT to confirm:
*** Formatting internal file system ***
All files will be deleted!
Are you sure?
FORMAT CANCEL
You will briefly see a message displaying "Formatting internal file system". Followed by "File System Formatted".
If using USB: Copy BOTH the PC3 OS File (PC3OS200.BIN) and Objects File (PC3OB200.PC3) to the USB Desktop Drive on your computer.
Press UPDATE IMAGE:
PC3 File System Utility 0.63.11214
File system set up (52720Kb free)
UPDATE FORMAT SETUP COPY FILE
IMAGE FLASH SYSTEM FILES UTILS QUIT
Press MAIN IMAGE:
What module do you want to update?
MAIN DIAG MAIN ALT RESTORE
IMAGE IMAGE OBJECT OBJECT OLDER <back>
Choose an external device: Depending on your connections, you may be asked to select between xD Card - or- USB port. If prompted, choose accordingly.
Choose an external device:
Card USB port CANCEL
Using the data wheel , select the O/S file (PC3OS200.BIN) (asterisk ∗ placed next to selection):
Choose a file to load:
PC3OB200.PC3 7748K bytes
∗ PC3OS200.BIN 3621K bytes
CHOOSE OPEN PARENT CANCEL
Press CHOOSE:
Choose a file to load:
PC3OB200.PC3 7748K bytes
∗ PC3OS200.BIN 3621K bytes
CHOOSE OPEN PARENT CANCEL
You will briefly see a message indicating "Copying Image..."
Press OK:
Bootable system built.
New module installed
OK
Press UPDATE IMAGE:
PC3 File System Utility 0.63.11214
File system set up (52720Kb free)
UPDATE FORMAT SETUP COPY FILE
IMAGE FLASH SYSTEM FILES UTILS QUIT
Press MAIN OBJECT:
What module do you want to update?
MAIN DIAG MAIN ALT RESTORE
IMAGE IMAGE OBJECT OBJECT OLDER <back>
Choose an external device: Depending on your connections, you may be asked to select between xD Card - or- USB port. If prompted, choose accordingly.
Choose an external device:
Card USB port CANCEL
Using the data wheel , select the OBJECT file (PC3OB200.PC3) (asterisk ∗ placed next to selection):
Choose a file to load:
∗ PC3OB200.PC3 7748K bytes
PC3OS200.BIN 3621K bytes
CHOOSE OPEN PARENT CANCEL
Press CHOOSE:
Choose a file to load:
∗ PC3OB200.PC3 7748K bytes
PC3OS200.BIN 3621K bytes
CHOOSE OPEN PARENT CANCEL
You will briefly see a message indicating "Copying object datafile..."
Press OK:
Copying object datafile...done
New module installed
OK
Press Quit
PC3 File System Utility 0.63.11214
File system set up (52720Kb free)
UPDATE FORMAT SETUP COPY FILE
IMAGE FLASH SYSTEM FILES UTILS QUIT
If installing by USB, your computer may issue a "device removal" notification. You can ignore it.
Press <back>:
EXEC COPY SAVE
from from to FORMAT
file ext ext card <back>
Press RUN PC3
RUN UPDATE RUN SYSTEM FILE
PC3 IMAGE DIAGS RESET UTILITIES
The PC3 will reboot to normal operating mode and is ready for use. |
评分
-
查看全部评分
|