korgI系列资源中arr文件 bsq文件 pcg文件 sty文件是什么意思？

zhongyin

korgI系列资源中arr文件  bsq文件  pcg文件  sty文件是什么意思？

西部雪狼

ARR风格文件，BSQ音序器文件，PCG是KORG的音色文件，STY是节奏文件！SNG是歌曲文件，GBL是总控文件！

[ 本帖最后由 西部雪狼 于 2006-5-15 18:37 编辑 ]

XXJ3574

原帖由 西部雪狼 于 2006-5-15 09:33 发表
ARR风格文件，BSQ音序器文件，PCG是KORG的歌曲文件，STY是节奏文件！

感谢雪狼大哥，请问ARR风格文件和STY节奏文件有何区别呢？

西部雪狼

这是KORG系列琴区别于别的琴所特有的！ARR是风格，什么ROCK，JAZZ，DISCO等等，是由很多的STY组成ARR！

XXJ3574

哦，原来是这样，基本明白了。谢谢！

wang

再请教狼兄,下面几个文件一并解说一下,ARk.GBL.SNG.ARG,谢谢.

苗哥

原帖由 西部雪狼 于 2006-5-15 11:06 发表
这是KORG系列琴区别于别的琴所特有的！ARR是风格，什么ROCK，JAZZ，DISCO等等，是由很多的STY组成ARR！

应该是KORG I系列所特有的的！pa系列没有！！！！！
用一个ARR可以和不同的STY组合成不同的伴奏风格，而PA 的就没有，感觉上PA和YAMAHA 的一样，都是预制的，并且操作上I系列的比PA 系列的好多了。

曲波

长见识
谢谢啊！

zhongyin

多谢啊！！

退出江湖

我的KORG Trinity plus的OS为1.1版本（出厂原版本），现下载了2.2和241两个升级版本，但不知如何操作。请各位大侠指教：1操作步骤：2注意事项：3升级后有何收获（变化）另：2.2 和 241  两版本用哪个合适。   附网上下载的英文说明               




WARNING!
This procedure includes erasing your Operating System FlashROM. If your Trinity loses power during the upgrade or if soemthing else goes wrong in the erase/reload process, then you are hosed. You will have to bring your machine to your local seller and quite surely pay a lot of money for the needed fix! So, this is your own risk, but if you have stable power lines and if you don't touch the machine during the upgrade, everything should run just fine. The upgrade also flushes the sound memories. Back up your sounds, if needed! READ THE WHOLE INSTRUCTIONS BEFORE DOING ANYTHING!

WARNING!


OK, what I did was the following:

1)
I downloaded the OS2.2 zip, which is on my Trinity page and unzipped it into any directory. It contains the following files:

Length    Date    Time    Name
------    ----    ----    ----
1265634  10-03-97  17:18   Disk1.td0
943750  10-03-97  17:25   Disk2.td0
  97999  05-15-92  10:42   Teledisk.exe


2)
Using the Teledisk program in REALTIME DOS, i.e not Windows 95 and not a DOS window, to write the diskimage files DISK1 and DISK2 onto new, freshly formatted 3.5" HD floppy disks. Write protect your disks directly after you wrote the images to the disks! Some idiotic mechanisms in Win95 and/or DOS destroy the disks, making them unusable for the Trinity.

3)
Power off the Trinity and put Disk 1 into the floppy drive. Hold down the RESET and ENTER key of the Trinity and power it on. It will automatically start the upgrade. It will also tell you to NOT TOUCH THE MACHINE while it is upgrading ... do so. Wait until it asks for disk number two. Change the disks then and it will automatically continue. If everything ran smoothly, the Trinity will reset itself automatically and display OS 2.2.0 on top of the startup animation.

4)
Your trinity will then show something like INIT COMBI 000 ... which means you pick up your favorite PCG and reload the machine. Have fun, the upgrade is done and you can switch off the machine. Happy happy happy, joy joy joy! :)

拜托各位大侠帮忙

PSR-450

明白了，谢谢！