注册时间2007-6-29
最后登录1970-1-1
在线时间 小时
主题
精华
积分109
贡献
ST
道具劵
|
本帖最后由 ahhui 于 2017-3-4 09:22 编辑
是把解压缩后的文件放在根目录,不是把那个文件夹放到根目录。
ROLOAND的官网上有详细的说明:
http://www.roland.com.cn/support ... ates_drivers/351354
我摘出来有关的几句
How to download and expand the archive file
Please open/extract the downloaded "e_a7_sys_v201.zip" file on your computer to get the update files in the "e_a7_sys_v201" folder.
把下载的 "e_a7_sys_v201.zip"文件解压缩到计算机上,它会建立一个同名的文件夹
我刚才看了一下,这个ZIP文件解开后会有6个文件,190MB多。
How to update
Important notice: Never turn the E-A7 off during the update process, or E-A7 won't reboot correctly any more.
在升级的时候,永远不要关闭的你的E-A7,E-A7也不会自己重启(和手机刷机类似,升级固件时重启可能会弄坏设备)
Step 2: Creating the Update USB Memory
Connect the USB Flash memory to the USB connector of your computer.
Copy the all update files in the above to the root folder of the USB Flash memory.
* Do not copy the "e_a7_sys_v201" folder.
Disconnect the USB Flash memory from your computer as follows.
[ Windows ]
Use the Safely Remove Hardware icon in the Windows task tray to un-mount the USB Flash memory. And then disconnect the USB Flash memory from your computer.
把U盘连到电脑上,把上面那6个升级文件COPY到U盘的根目录,不要COPY那个文件夹
安全弹出U盘
When the message "SUCCESS" is displayed, the operation has finished. (You will take about 30 minutes to update.)
当出现提示信息 "SUCCESS"的时候表示成功了,大概需要30分钟
其余的按面包老师说的那个步骤,或者按上面Roland官网上的英文说明操作就行了。 |
|