注册时间2004-3-10
最后登录1970-1-1
在线时间 小时
主题
精华
积分106
贡献
ST
道具劵
|

楼主 |
发表于 2008-4-2 22:12
|
显示全部楼层
谢谢32768...
其实能导入ksc文件已经很强大了... 国外的Korg论坛里还是有不少资源的...
在korgforum里看到一个选内存的技巧(http://www.korgforums.com/forum/phpBB2/viewtopic.php?t=118)
Hello,
As about every Tritonian knows, finding good RAM for his/her baby is quite a nightmare : "16 or 32 MB, EDO or Fast Page compatible, access time 60ns or less, 11 bits addressing mode".
The latter, "11 bits addressing mode" is the most important specification the memory must follow. But many manufacturers/sellers don't speak about "addressing mode" and you find "1k", "2k", "4 chips", or other unknown terms.
So, I will give you "the" magic formula. This is not from me, but it is the resume of all I could grab in the forums and by reading some FAQ (this from Kingston is very explanative) :
11 bits addressing mode = 2k refresh
For 16 MB you absolutely need 8 chips, and for 32 MB 16 chips (double-sided, thus 2x8 chips).
I found such memory at 10$ piece at 2-3 shops (search "32 MB EDO 2k" at http://www.pricewatch.com for the list and you'll find the Holy Grail)
_________________
Regards,
Xavier Miller.
_______________________________ |
|